Polyken 955 Pipe Anti Corrosion Tape
Basic Info
Model No.: Polyken955
Product Description
Description
The Pipe Anti-Corrosion Tape System has been developed for long term protection of metal surfaces that are
underground, underwater, or exposed – even in the most severe environments.The pipe Anti-Corrosion Tape
adheres to surfaces without heating, even on damp and/or indifferently prepared areas.
Structure and Specifications
Backing : Special blend of stabilized polyethylene
Adhesive : Butyl rubber and Adhesion Promoting Resins
Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)
Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)
Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)
| Product Properties | Test method | Typical Value | |||
| POLYKEN955-15 | POLYKEN955-20 | POLYKEN955-25 | POLYKEN955-30 | ||
| Total Thickness |
| 15mil(0.381mm) | 20mil(0.508mm) | 25mil(0.635mm) | 30mil(0.762mm) |
| Backing of PE film |
| 10mils(0.254 mm) | 15mil(0.381mm) | 20mil(0.508mm) | 25mil(0.635mm) |
| Butyl Rubber Adhesive |
| 5 mils(0.127 mm) | 5mil(0.127mm) | 5mil(0.127mm) | 5mil(0.127mm) |
| Tensile Strength | ASTM D1000 | 50N/cm | 60N/cm | 70 N/cm | 80 N/cm |
| Elongation | ASTM D1000 | 300% | 350% | 350% | 450% |
| Peel Adhesion to Primed Steel | ASTM D1000 | 24 N/cm | 25 N/cm | 26.5 N/cm | 33 N/cm |
| Water Vapor Transmission Rate | ASTM E 96 | 0.10g/m2 | 0.10g/m2 | 0.08g/m2 | 0.06g/m2 |
| Water absorption after 1 day,At+23℃ | ASTM D570 | 0.10% | 0.10% | 0. 08% | 0. 06% |
| Volume Resistivity | ASTM D 257 | 2.0 x 1015 ohm.cm | 2.5 x 1015 ohm.cm | 2.6 x 1015 ohm.cm | 2.6 x 1015 ohm.cm |
| Dielectric Strength | ASTM D149 | 30 kv | 36 kv | 43 kV | 45 kV |
Other Products Recommendation
Cold Wrap Tape,Coating Masking Tape,Pp Anti-corrosion Tape,Polypropylene Tape,Pipe Repair Tape.
Product Categories : Polyken Pipe Coating System > Polyken 955 (Outer Wrap)