Multi-Jet Dry Type Vane Wheel Cold with External Adjust & Water Meter

Features
With external regulating device
Magnetic drive, lower transmission resistance
Magnetic shield, use for external magnetic field protection
Evacuated and sealed dry dial register ensures clear reading
Central strainer
Inlet Strainer
There are two versions DN50 meter body to be chosen: With threaded ends or flanged ends

Compliance with Standard
Technical data conforms to ISO 4064 Class B Standard for horizontal installation

Options
Meter with non return valve(different price) is available except ECO- LXSCE DN15-50
Meter for hot water up to 90°is available
Meter equipped with reed switch is available

Installation Requirements
The meter should be installed in horizontal position with the register face upwards
Pipeline must be flushed before installation
The meter should be constantly full of water during operation

Application
Measuring the volume of cold potable water passing through the pipeline
Working Conditions
Water temperature: ≤40ºC
Water pressure: ≤1.6MPa 

1. Fast Delivery: around 10 days below 500Metric Tons after sight of Irrevocable L/C or Deposit;( lots of high quality products are in stock)

2. Quality Assured: Strictly acc. To International standard ASTM & BS & EN & JIS, with System ISO certification

3. Good Service: supplied professional technical guide free of charge at anytime;

4. Reasonable Price: to be better support your business.

We are one of the leading manufacturers of ductile iron pipe,Pipe Fittings,dismantling Joints ,flanged adaptors, couplings, valves, water meter,Manhole Covers,steel Flanges , steel pipe,steel pipe fitting, PVC pipe ,PVC Pipe Fitting, PE pipe ,PE pipe fitting,rubber O-rings, , Fasteners , pumps, motor shells and other Castings and Forgings. Our products are made according to different standards, such as ISO2531, EN545, EN14525, ISO4422, ISO7005, DIN3352, BS5163, DIN3202, BS2494, BS4504, EN124 and other relevant ISO, EN, BS, DIN and ANSI standards. Moreover, our products have been selling well in European, Middle East, Southeast Asian, South African and South American countries for more than 10 years. We can also make the castings and forgings according to customers' drawings or samples. Presently, we are looking forward to your inquiries and to establishing long term cooperation relationship based on mutual benefits.  

1. Can I get free samples?
A: Yes, we can provide you the free samples, but you need to bear their own delivery costs.

2. Can I request to change the form of packaging and transportation?
A: Yes, We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.

3. Can I request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.

4. Can I have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.

5. Can you produce the products according to my own drawings?
A: Yes, we can produce the products according to your drawings that will be most satisfy you.

6. Which price terms could accepted?
A: FOB,CIF all acceptable.