Solide carbide UN cutter taps
Product Description
Carbide UN cutter taps
US thread (except for Pipe) generally refers to a thread of a standard tooth type according to ANSI B1.1 with a crest angle of 60 degrees and parallel threads. The series of American threads refers to the combination of thread diameter and pitch. For US-made uniform threads, it refers to the number of different teeth per inch corresponding to a certain series of specific diameters, ie the number of teeth per inch.
The US thread series includes five series of UNC, UNF, UNEF, UN and UNS, which represent coarse teeth, fine teeth, superfine teeth, constant pitch and special threads. Among them, UNC and UNF are the most commonly used. The smaller outer diameter is indicated by the number: NO: 0, NO: 1, NO: 2, NO: 3, NO: 4, NO: 5 up to NO: 12, a total of 10 numbers; For example, 1/4-20UNC, 1/4 is the outer diameter size, 20 is the number of teeth per inch, and UNC is the coarse tooth in the US uniform thread.
The following are the specifications of the more commonly used American (non-pipe) thread taps (wire taps) U:
NO 0-80UNF, NO1-72UNF, NO 1-64UNC, NO 2-56UNC, NO 3-48UNC, NO 4-40UNC, NO 4-48UNF, NO 5-40UNC, NO 6-32UNC, NO 6-40UNF, NO 8-32UNC, NO 8-36UNC, NO 10-24UNC, NO 10-32UNF, NO 10-40UNS, NO 12-24UNC, NO 12-28UNF, NO 12-36UNS, 1/4-20UNC, 1/4-24UNS 1/4-28UNF, 1/4-32UNEF, 5/16-18UNC, 5/16-20UN, 5/16-24UNF, 5/16-27UNS, 5/16-32UNEF, 3/8-16UNC, 3 /8-20UN, 3/8-24UNF, 3/8-32UNEF, 7/16-14UNC, 7/16-20UNF, 7/16-24UNS, 7/16-28UNEF, 1/2-12 UNS, 1/2 -13UNC, 1/2-16UN, 1/2-20UNF, 1/2-28UNEF, 9/16-12UNC, 9/16-18UNF, 9/16-24UNEF, 5/8-11UNC, 5/8-18UNF , 5/8-24UNEF, 3/4-10UNC, 3/4-16UNF, 3/4-20UNEF, 3/4-24UNS, 7/8-14UNF, 7/8-20UNEF, 7/8-24UNS, 15 /16-28UN, 1"-8UNC, 1"-12UNF, 1"-20UNEF, 1-1/8-12UNF, 1-1/8-16UN, 1-1/4-7UNC, 1-1/4- 12UNF, 1-1/2-6UNC------ and so on.
Usually American or British threads do not directly mark the pitch, but mark how many teeth per inch, for example: 1/4-20, 20 means 20 teeth per inch, then the pitch should be: 25.4/20=1.27mm.
Features:
carbide Taps are usually divided into single or groups. The through-hole thread of the small and medium size can be tapped once with a single tap. When processing a blind hole or a large-sized screw hole, a group of taps is commonly used, that is, one screw hole is sequentially processed by using two or more taps. Group taps have equal and unequal diameters
Two designs. The carbide taps of the equal-diameter design have different lengths of the cutting cones only; the carbide taps of the unequal-diameter design have different thread sizes, and only the last one has a complete tooth shape.
Spiral-Pointed taps, or Machine Taps, were originated to solve the problem of tap breakage in through hole tapping. The Machine Tap shoots chips ahead of the cutting action, thus reducing loading and clogging in the flutes. They are recommended for use in through or blind holes which allow for chip accumulation in the bottom of the hole. Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics.
Characters and advantages of products:
1 high precision
2 high efficiency
3 all the cutting tools quality meet the ISO international standard.
4 high strength and high hardness, hard-wearing
5 competitive price
6 fast deliv
| Size | Nominal diameter | TPI/1 | Flute | O.A.L | Thread lengh | Shank Dia. | Model No. | |
| M | Z | L1 | L2 | D2 | Uncaoted | caoted | ||
| No5 | 3.2 | 40 | 3 | 48 | 11 | 2.24 | 4935-032Z | ■ 4935T-032Z |
| No6 | 3.5 | 32 | 3 | 60 | 13 | 2.5 | 4935-035Y | ■ 4935T-035Y |
| No8 | 4.2 | 32 | 3 | 53 | 13 | 3.15 | 4935-042Y | ■ 4935T-042Y |
| No10 | 4.8 | 24 | 3 | 58 | 16 | 3.56 | 4935-048X | ■ 4935T-048X |
| 2018/1/4 | 6.4 | 20 | 3 | 66 | 19 | 46 | 4935-064W | ■ 4935T-064W |
| 2018/5/16 | 7.9 | 18 | 4 | 72 | 22 | 6.3 | 4945-079V | ■ 4945T-079V |
| 2018/3/8 | 9.5 | 16 | 4 | 80 | 24 | 7.1 | 4946-095U | ■ 4946T-095U |
| 2018/7/16 | 11.1 | 14 | 4 | 85 | 25 | 8 | 4945-111T | ■ 4945T-111T |
| 2018/1/2 | 12.7 | 12 | 4 | 89 | 29 | 9 | 4945-127R | ■ 4945T-127R |
| 2018/9/16 | 14.3 | 12 | 4 | 95 | 30 | 11.2 | 4945-143R | ■ 4946T-143R |
| 2018/5/8 | 15.9 | 11 | 4 | 102 | 32 | 12.5 | 4945-159Q | ■ 4945T-159Q |
| 2018/3/4 | 19.1 | 10 | 4 | 112 | 37 | 14 | 4945-191P | ■ 4945T-191P |
| 2018/7/8 | 22.2 | 9 | 4 | 118 | 38 | 16 | 4945-2220 | ■ 4945T-222O |
| 1" | 25.4 | 8 | 4 | 130 | 45 | 18 | 4945-264N | ■ 4946T-254N |
PRODUCT DETAIL:
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD inserts, PCD Reamers, PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
Product Categories : Carbide Taps > Cutter Taps